 | |
 |
 |
| |
| NEW BONT PLATINUM POWDER 390 BLADES |
The Bont Platinum blade is made with K390 powder metal tool steel. It holds its edge up to 8 times longer than normal steel blades. The powder metal structure is very fine which gives exceptional gliding properties. The platinum blade is made in Holland. New construction!
| | Size : 16.0 - 16.5 - 17.0 - 17.5 |
| Weight : 2 |
| No prod : PLST390 | 509,99 $ CND |
| Add to you cart |
|
|
 |
| |
| PENNINGTON KATANA BI-METAL 1.1MM BLADES |
| The unique properties of this blade allow a higher ice clearance with its reinforced blade to tube offset. A special cryogenic treatment gives this blade its exceptional glide quantities. The advanced technologies in the blade design allows for controlled bending where you need it. Split angle cups and blade mount area for unrestricted bending along the full length of the blade. The Katana blade is recognised by today’s champions as a high performance blade that can be relied on to deliver when optimum force is called on. | | Size : 16.5" - 17.0" |
| Weight : 2 |
| No prod : P7001 | 499,99 $ CND |
| Add to you cart |
|
|
 |
| |
| MAPLE DURO BLADES |
The Maple Duro is an improved version of the Maple Gold. New advanced gluing technology and a new glue joint design gives the blade an unknown direct contact with the ice. . Tomorrow’s champions skate on Maple Duro. Bi-metal 64 Hrc or PM steel 66 Hrs
Precision grinded to thickness 1,10 -1,18 –1,25 mm Cups and tube: anodized 7000 series aluminum gold colored anodized tube
| Size : 16.0 (1.1) - 16.0 (1.1 +6mm) -
16.0 (1.1 +12mm) - 16.0 (1.1 +18mm) -
16.0 (1.18) - 16.0 (1.18 +6mm) -
16.0 (1.18 +12mm) - 16.0 (1.18 +18mm) -
16.0 (1.25) - 16.0 (1.25 +6mm) -
16.0 (1.25 +12mm) - 16.0 (1.25 +18mm) -
16.5 (1.1) - 16.5 (1.1 +6mm) -
16.5 (1.1 +12mm) - 16.5 (1.1 +18mm) -
16.5 (1.18) - 16.5 (1.18 +6mm) -
16.5 (1.18 +12mm) - 16.5 (1.18 +18mm) -
16.5 (1.25) - 16.5 (1.25 +6mm) -
16.5 (1.25 +12mm) - 16.5 (1.25 +18mm) -
17.0 (1.1) - 17.0 (1.1 +6mm) -
17.0 (1.1 +12mm) - 17.0 (1.1 +18mm) -
17.0 (1.18) - 17.0 (1.18 +6mm) -
17.0 (1.18 +12mm) - 17.0 (1.18 +18mm) -
17.0 (1.25) - 17.0 (1.25 +6mm) -
17.0 (1.25 +12mm) - 17.0 (1.25 +18mm) -
17.5 (1.1) - 17.5 (1.1 +6mm) -
17.5 (1.1 +12mm) - 17.5 (1.1 +18mm) -
17.5 (1.18) - 17.5 (1.18 +6mm) -
17.5 (1.18 +12mm) - 17.5 (1.18 +18mm) -
17.5 (1.25) - 17.5 (1.25 +6mm) -
17.5 (1.25 +12mm) - 17.5 (1.25 +18mm) -
18.0 (1.1) - 18.0 (1.1 +6mm) -
18.0 (1.1 +12mm) - 18.0 (1.1 +18mm) -
18.0 (1.18) - 18.0 (1.18 +6mm) -
18.0 (1.18 +12mm) - 18.0 (1.18 +18mm) -
18.0 (1.25) - 18.0 (1.25 +6mm) -
18.0 (1.25 +12mm) - 18.0 (1.25 +18mm) |
| Weight : 2 |
| No prod : 101301D | 489,99 $ CND |
| Add to you cart |
|
|
 |
| |
| MAPLE GOLD BI-METAL PM (POWDER METAL) BLADES |
Maple Gold Short Track blades feature integral cup posts allowing unprecedented consistent bend radius and extra stiff 7000 series alloy tube with a PM metal blade. Comes with 7000 series alloy cups. Maple Gold is the world standard for short track. Today's champions skate on Maple Gold.
It's Bi-metal PM.
Cups and tube: anodised 7000 series aluminiumgold colored anodised tube | | Size : 16.5 - 17.0 - 17.5 |
| Weight : 2 |
| No prod : 101301GP | 479,99 $ CND |
| Add to you cart |
|
|
 |
| |
| BONT PLATINUM 190 BLADES |
The Bont Platinum blade is made with K190 powder metal tool steel. It holds its edge up to 8 times longer than normal steel blades. The powder metal structure is very fine which gives exceptional gliding properties. The platinum blade is laser cut and hardened in Australia and glue and machined in Holland. The blades can be ordered straight or bent. We also offer them in KR and Half KR spec which have the mounting set back 2cm and 1cm respectively on the blade.
| Size : 15.0 --- 6.5" - 15.5 --- 6.5" - 16.5 --- 6.5" -
17.25 --- 6.5" - 17.5 --- 6.5" -
18.0 --- 6.5" - 16.5 --- 6.5 KR -
17.0 --- 6.5" KR |
| Weight : 2 |
| No prod : PLST190 | 479,99 $ CND |
| Add to you cart |
|
|
 |
| |
| MAPLE GOLD BLADES |
Maple Gold Short Track blades feature integral cup posts allowing unprecedented consistent bend radius and extra stiff 7000 series alloy tube with a 1.1 mm thick cryogenic treated Bi metal blade hardened to Rockwell 64 on the C scale. Comes with 7000 series alloy cups. Currently the most widely used blade on the ST world cup circuit.
The Maple Gold is the world standard for short track. Today's champions skate on Maple Gold. The choice of olympic champion Apolo Ohno and the Korean National team.
Bi-metal 64 Hrc Precision grinded to thickness 1,10 -1,18 –1,25 mm Cups and tube: anodised 7000 series aluminiumgold colored anodised tube
| Size : 14 - 15 - 15.5 - 16 - 16.5 - 17 - 17.5 - 18 -
18.5 |
| Weight : 2 |
| No prod : 101-301G | 429,99 $ CND |
| Add to you cart |
|
|
 |
| |
| MAPLE SUPERFLEX BLADES |
There are those who use pure strength and those who use skill. Short trackers of the latter category choose the flexibility of Maple Superflex. Because you can also race with refinement. The first choice for young elite or lightweight racers.
Bi-metal 64 Hrc Precision grinded to thickness 1,10 -1,18 –1,25 mm
Cups and tube: anodized 7000 series aluminum Red anodized tube
| Size : 14 - 14.5 - 15 - 15.5 - 16 - 16.5 - 17 - 17.5 -
18 |
| Weight : 2 |
| No prod : 101-301S | 429,99 $ CND |
| Add to you cart |
|
|
 |
| |
| MAPLE CHROME |
Chrome Short Track blades feature the same structure and cups as the Maple Gold Bi Metal with a ground 1.1 mm thick heat treated high Chrome stainless steel blade hardened to Rockwell 60c. Glide tests showed this blade to be faster than most of the other blades on the market today. By far the best buy in a entry level ST Racing blade. Chrome tool steel 60 Hrc.
The blades have received a special treatment in order to reduce the friction to a minimum. Precision ground blades to 1,10 mm Aluminum 7000 series tube for optimal flexibility; stable and yet easy to control
Cups 7000 serie aluminum gold color anodized tubes.
| | Size : 14 - 15 - 15.5 - 16 - 16.5 - 17 - 17.5 - 18 |
| Weight : 2 |
| No prod : 101-311 | 249,99 $ CND |
| Add to you cart |
|
|
 |
| |
| MAPLE PREMIUM |
Great quality entry level blade. Built with aircraft grade 7000 series aluminum structure and adaptable to various boot mount spacing. Sold With cups (mounting brackets). Chrome tool steel 58rc. The blades have received a special treatment in order to reduce the friction to a minimum. Precision ground blades to 1,10 mm Aluminum 7000 series tube for optimal flexibility; stable and yet easy to control Cups 7000 serie aluminum silver anodized tubes.
| Size : 12 - 13 - 13.5 - 14 - 14.5 - 15 - 15.5 - 16 -
16.5 - 17 - 17.5 |
| Weight : 2 |
| No prod : 101-250 | 189,99 $ CND |
| Add to you cart |
|
|